Oqontz Corporation
Oqontz Corporation
2835 Terwood Road
Willow Grove, PA 19090
Toll Free: 800-523-2478
Phone: 215-657-4770
Email: info@ogontz.com
Print Back
The ST/STE is a fully self-contained temperature control valve. It effectively maintains the desired temperature in a process pipe or storage tank by automatically regulating steam flow in response to changes in fluid temperature. As a result, its operation minimizes costly steam waste and prevents damage to process fluids due to overheating.High reliability, low maintenance, and long service life are assured by a state-of-the-art precision thermal actuator. The ST/STE valve eliminates the use of delicate capillaries, hazardous chemically-filled diaphragms or thin-walled bellows. It can also be used to back up existing electrically traced systems, with significant savings and equivalent temperature control.The ST can be attached to a process pipe or tank wall by welding or banding (e.g. stainless steel worm gear pipe clamp) and thermally bonded to the wall with thermal cement, without penetrating the wall.For those applications calling for the penetration of a tank wall, our STE valve can be supplied with an acutator extension of up to 72 inches in brass or stainless steel along with an associated thermal well in those materials. For longer lengths, consult your local authorized distributor for pricing and availability.Design Features
  • Direct acting (no pilot valve)
  • Self-contained, solid-liquid thermal actuator requires no external power or operating signal
  • High repeatability — no set point drift
  • Valve port opens gradually, preventing system shock
  • Temperature set points from 35°F to 240°F
  • In-line serviceable
  • Line sizes 1/2" through 2"
  • 100% factory tested
Self-Contained Thermal Actuator The heart of the valve is the unique, solidliquid phase thermal actuator. This hydrocarbon wax-filled device actuates the valve in response to changes in ambient temperature. The transition from solid to liquid phase causes a large change in volume, exerting a tremendous force over a narrow temperature band.
Unit of Measure

Specifications

Valve Type

 N/A ST Temperature Sensing Control Valve

NPT Thread Size

 N/A 1/2 in

Full Open Set Point Temperature Range

 N/A 35 to 240 ºF

Maximum Operating Pressure

 N/A 200 psig

Body Rating

 N/A ANSI 300 lb. class

Orifice Size

 N/A 1/2 in
Flow Coefficient (Cv)1 N/A 3.4

Valve Action

 N/A Direct

Maximum Capacity of Saturated Steam at 15 psig Inlet Pressure

 N/A 186 lb/hr

Maximum Capacity of Saturated Steam at 30 psig Inlet Pressure

 N/A 280 lb/hr

Maximum Capacity of Saturated Steam at 50 psig Inlet Pressure

 N/A 405 lb/hr

Maximum Capacity of Saturated Steam at 100 psig Inlet Pressure

 N/A 718 lb/hr

Maximum Capacity of Saturated Steam at 150 psig Inlet Pressure

 N/A 1030 lb/hr

Maximum Capacity of Saturated Steam at 200 psig Inlet Pressure

 N/A 1343 lb/hr

Body Material

 N/A Stainless Steel

Dimension A

 N/A 4 in

Dimension B

 N/A 11-5/8 in

Dimensional Drawing

 N/A
ST/STE Schematic Figure 2

Net Weight

 N/A 8.5 lb

Note

 N/A 1 1/4" NPT female connection required to mount STE valve into well Optional matching length 316 SS well, order part number 3402997 (well external threads 1 1/2" NPT) STE standard extension length is 6" STE standard extension material is brass (stainless steel available – consult local distributor) Valves supplied with heat conductive compound

The Ogontz Guarantee

 N/A We will repair or replace on a no-charge basis, F.O.B. Willow Grove, PA, any Ogontz product returned to us within 18 months, if found to be defective in material or workmanship.

STE Well Extension Length Range

 N/A 6 to 72 in
  • 1 ±10 % Tolerance