The Ogontz TL valve is a fully self-contained, temperature-actuated control valve. It effectively eliminates steam waste by automatically regulating the supply of steam in response to changes in ambient temperature. As a result, the TL valve achieves dramatic reductions in the amount of steam consumed, with annual savings averaging eight times its installed cost. High reliability, low maintenance and long service life are assured by the state-of-the-art, precision thermal actuator. The TL valve completely eliminates the use of hazardous, chemically filled diaphragms, delicate capillaries or thin-walled bellows. The TL valve continuously monitors ambient temperature, and regulates steam flow on an as needed basis. This eliminates steam waste and substantially reduces the possibility of overheating. The TL valve is ideal for steam-traced lines of all types, protecting temperature sensitive instrumentation, winterizing product lines, conserving energy in unit heaters, and other applications requiring control of heat transfer media (i.e. glycol, hot oil, water, etc.) based on ambient temperature change. The TL ambient sensing valve is the key to positive, year-round protection of your systems and equipment at the lowest cost.Design Features

• Direct acting (no pilot valve)
• Self-contained, solid-liquid thermal actuator requires no external power or operating signal
• High repeatability — no set point drift
• Valve port opens gradually, preventing system shock
• Fail safe (valve opens)
• Temperature set points from 35°F to 240°F
• In-line serviceable
• Line sizes 1/2" through 2"
• 100% factory tested

Self-Contained Thermal ActuatorThe heart of the TL valve is the unique, solid-liquid phase thermal actuator. This hydrocarbon wax-filled device actuates the valve in response to changes in ambient temperature. The transition from solid to liquid phase causes a large change in volume, exerting a tremendous force over a narrow temperature band.

Maximum Performance Minimum Cost

• Self-contained actuator
• No external power or remote signal
• In-line serviceability
• Insensitive to line pressure
• Valve opens/closes gradually, preventing system shock
• High repeatability: No set point drift
• Set points from 35 to 240°F
• Maximum working pressure 200 psig
• 100% factory tested

Benefits

• Easy Installation
• Reliable, unattended operation
• Minimal maintenance requirements
• Eliminates costly freeze damage

Specification and Ordering Information

• Solid/Liquid Thermal Actuator
• Brass or Stainless Steel Body
• Stainless Steel Springs
• Stainless Steel Seat
• Silicone Plug Seal
  
  

Design Features

• Thermal actuator controls flow of steam as needed— eliminates danger of overheating temperature sensitive instruments or analyzers
• Provides effective freeze protection
• No explosion proof housings or other precautions needed
• Pre-calibrated actuators are interchangeable for quick easy change of enclosure temperature
• Direct acting (no pilot valve)
• High repeatability (no control point drift)
• Valve port opens gradually preventing system shock
• Range of temperature control points from 35°F to 240°F
• Maintains enclosure temperature to within ± 3°F of control point over wide range of ambient temperatures and steam supply pressures
• 100% factory tested

Note: Valve will slowly actuate within a 15°F differential of factory calibrated specified stepoint.

Design Features

• Self-contained actuator
• No external power or remote signal
• In line serviceability
• Insensitive to line pressure
• Valve opens/closes gradually,preventing system shock
• High repeatability: No set point drift
• Set points from 35 to 255°F
• Max working pressure 200 psig
• 100% factory tested

Benefits

• Easy installation
• Reliable, unattended operation
• Minimal maintenance requirements

Note: Specify temperature between 35° and 255°F in 5°F increments. Differential from full open to full closed is typically 10° to 15°F. Valve opens/closes gradually.